CF Root for Samsung galaxy S3 GT-I9300 and GT-I9300T
By using this guide you can root the galaxy S3 which running on Android ice cream sandwich or jelly bean (4.0.4, 4.1.1, 4.1.2, 4.2.1)
Rooting instructions :
Backup your data first
1- Download CF-Root-SGS3 file (Link below)
2- Unzip the downloaded file only one time
3- Open "Odin3" as administrator
4- Click on PDA button and browse to the CF-Root-SGS3-vX.X.tar file that you extracted
5 - Disconnect any device connected to USB ports on your computer and disable your antivirus software
6 - Shut down your device
7 - Put your device into Download Mode (Volume Down + Home + Power)
8 - Volume up to continue
9 - Connect the device to your computer by USB cable and wait until you get a sign in Odin (ID:COM section) and "Added" in message
10 - Make sure re-partition is NOT TICKED [Very important]
11 - Click Start and wait a few seconds.
Notes :
~ Check this if you face problem after rooting How to Fix Android 4.3 Jelly Bean Rooting Problem for Galaxy S3/S4/Note 2/3
~ Do not disconnect the cable or turn off the device while rooting
~ This stuff is made ONLY for the GT-I9300 and GT-I9300T
~ I am not responsible if something bad happened to your device (use this AT YOUR OWN RISK)
~ It will void the warranty of your device
~ Download and Install Kies or Samsung mobile driver, if you didn't get a sign in ID:COM or "Added" in message box
~ It will install : "Root: SuperSU","Recovery: ClockWorkMod","Util: CWM Manager"
~ Credits go to "Chainfire" (CF-Root developer)
~ XDA "CF-Root" thread http://goo.gl/asDw5
Downloads :
CF-Root-SGS3-v6.4.zip HERE
Odin3_v3.04 HERE, v3.07 HERE, v3.09 HERE
Latest Samsung Mobile Driver HERE
Latest Samsung Kies HERE
By using this guide you can root the galaxy S3 which running on Android ice cream sandwich or jelly bean (4.0.4, 4.1.1, 4.1.2, 4.2.1)
Rooting instructions :
Backup your data first
1- Download CF-Root-SGS3 file (Link below)
2- Unzip the downloaded file only one time
3- Open "Odin3" as administrator
4- Click on PDA button and browse to the CF-Root-SGS3-vX.X.tar file that you extracted
5 - Disconnect any device connected to USB ports on your computer and disable your antivirus software
6 - Shut down your device
7 - Put your device into Download Mode (Volume Down + Home + Power)
8 - Volume up to continue
9 - Connect the device to your computer by USB cable and wait until you get a sign in Odin (ID:COM section) and "Added" in message
10 - Make sure re-partition is NOT TICKED [Very important]
Done !
~ Check this if you face problem after rooting How to Fix Android 4.3 Jelly Bean Rooting Problem for Galaxy S3/S4/Note 2/3
~ Do not disconnect the cable or turn off the device while rooting
~ This stuff is made ONLY for the GT-I9300 and GT-I9300T
~ I am not responsible if something bad happened to your device (use this AT YOUR OWN RISK)
~ It will void the warranty of your device
~ Download and Install Kies or Samsung mobile driver, if you didn't get a sign in ID:COM or "Added" in message box
~ It will install : "Root: SuperSU","Recovery: ClockWorkMod","Util: CWM Manager"
~ Credits go to "Chainfire" (CF-Root developer)
~ XDA "CF-Root" thread http://goo.gl/asDw5
Downloads :
CF-Root-SGS3-v6.4.zip HERE
Odin3_v3.04 HERE, v3.07 HERE, v3.09 HERE
Latest Samsung Mobile Driver HERE
Latest Samsung Kies HERE
comment 0 التعليقات:
more_vertsentiment_satisfied Emoticon